{"product_id":"prv-audio-8mb700ft-ndy-8-midbass-neodymium-loudspeaker","title":"PRV Audio 8MB700FT-NDY 8\" MIDBASS NEODYMIUM LOUDSPEAKER","description":"\u003cdiv\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cdiv\u003e \u003cp\u003ePRV Audios 8MB700FT-NDY Forte Series was specially tailored to give you more power handling and less distortion. The larger voice coil ensures high heat dissipation and the necessary Bl to deliver high sensitivity even at high power with the minimum distortion.\u003c\/p\u003e \u003cdiv\u003e \u003cp\u003eThe lower Qts allows more precise midbass. Superior fidelity is achieved through a perfect combination of a non-pressed cone with a smooth frequency response and its well ventilated magnet motor specially designed to allow high displacement without increasing distortion.\u003c\/p\u003e \u003chr\u003e \u003cdiv\u003e\u003cdiv\u003e\u003cul\u003e \u003cli\u003e2.5 Voice Coil More power handling and less distortion on mid low midbass frequencies\u003c\/li\u003e \u003cli\u003eIts powerful neodymium motor is vented to provide excellent cooling.\u003c\/li\u003e \u003cli\u003e8 PRO Audio Midbass loudspeaker designed for Low Frequencies at High Power 8 Ohm\u003c\/li\u003e \u003cli\u003e700 watts RMS program power gives capability of high acoustical output.\u003c\/li\u003e \u003cli\u003eAlso Available at 4 Ohm\u003c\/li\u003e \u003c\/ul\u003e\u003c\/div\u003e\u003c\/div\u003e \u003chr\u003e \u003cdiv\u003e\u003cdiv\u003e \u003cp\u003eTo get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.\u003c\/p\u003e \u003cp\u003eThis 8 is a great midbass option for pro audio systems or high SPL automotive systems, where extremely high output is required.\u003c\/p\u003e \u003c\/div\u003e\u003c\/div\u003e \u003chr\u003e \u003cdiv\u003e\u003cdiv\u003e \u003cp\u003eThis midbass will stand up to years of serious professional use! Thanks to its special composed spider reduces distortion at a high excursion and double roll surround keep cone travel linear at high excursion.\u003c\/p\u003e \u003cp\u003eThe 8MB700FT-NDY is an extremely efficient 8 midbass, due to its wide frequency band and 98 dB sensitivity rating, this speaker is ideal for pairing with compression drivers, on 3-Way system.\u003c\/p\u003e \u003c\/div\u003e\u003c\/div\u003e \u003chr\u003e \u003cdiv\u003e\u003cdiv\u003e \u003cp\u003eThe large 2.5 voice coil allows for the high 700 watts power handling and warrants the outstanding cooling system implemented into the motor.\u003c\/p\u003e \u003cp\u003eEngineered with 11 mm of winding depth, this inside\/outside voice coil provides excellent thermal and mechanical durability.\u003c\/p\u003e \u003c\/div\u003e\u003c\/div\u003e \u003cdiv\u003e\u003c\/div\u003e \u003chr\u003e \u003ch4\u003ePRV 8 Midbass Speaker 8MB700FT-NDY 700 Watts \/ 8 Ohm High Power PRO Audio Low Frequency Neodymium Loudspeaker\u003c\/h4\u003e \u003cp\u003eRecommended Amplifier configurations and crossover points:\u003cbr\u003e 2 Speakers 1x MDX1200.2 2 Ohm, 2 speakers in parallel on bridged channel\u003cbr\u003e 4 Speakers 1x QS3000 2 Ohm, 4 speakers in parallel\u003cbr\u003e 8 Speakers 1x QS5000 1 Ohm, 8 speakers in parallel\u003c\/p\u003e \u003cp\u003eRecommended \u003cstrong\u003eHPF\u003c\/strong\u003e using PRV Digital Signal Processor DSP when using up to 700 Watts RMS musical power ( without clipping )\u003c\/p\u003e \u003cul\u003e \u003cli\u003e95 Hz at 12 dB per octave filter Crossover \/ BT12\u003c\/li\u003e \u003cli\u003e85 Hz at 18 dB per octave filter Crossover \/ BT18\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you have compression drivers on your system the recommended LPF is 4,500 at 18 dB per octave filter Crossover \/ BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a \u003cstrong\u003eLPF\u003c\/strong\u003e at low power to take advantage of its high frequency response. \u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e \u003ch4\u003eGENERAL SPECIFICATIONS\u003c\/h4\u003e \u003cdiv\u003e \u003cdiv\u003e\u003ctable\u003e\u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eNominal Diameter\u003c\/td\u003e \u003ctd\u003e8\" (203 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eNominal impedance\u003c\/td\u003e \u003ctd\u003e8 Ohm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eNominal Power Handling*\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e\u003cstrong\u003e350 Watts\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eContinuous Program Power (RMS)**\u003c\/td\u003e \u003ctd\u003e700 Watts\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMax Peak Power***\u003c\/td\u003e \u003ctd\u003e1400 Watts\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eSensitivity 2.83V at 1m\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e\u003cstrong\u003e98 dB\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRecommended Hi Pass Crossover For Full Power Handling\u003c\/td\u003e \u003ctd\u003e95 Hz 12db Per Octave Crossover\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFrequency Response at -10dB\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e\u003cstrong\u003e70 - 5,600 Hz\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e \u003ctd\u003e2.5\" (63 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVoice Coil Wire\u003c\/td\u003e \u003ctd\u003eCCAW\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVoice Coil Winding Depth\u003c\/td\u003e \u003ctd\u003e11.3 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFormer Material\u003c\/td\u003e \u003ctd\u003eFiber Glass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMagnetic Gap Depth\u003c\/td\u003e \u003ctd\u003e8.00 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrame Material\u003c\/td\u003e \u003ctd\u003eDie Cast Aluminum\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e \u003cdiv\u003e \u003csup\u003e\u003cstrong\u003e*Nominal power handling\u003c\/strong\u003e is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db\/oct tuned in its usable frequency range. \u003c\/sup\u003e\u003csup\u003e\u003cstrong\u003e**Continuous Program Power (RMS)\u003c\/strong\u003e is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. \u003c\/sup\u003e\u003csup\u003e\u003cstrong\u003e***Max Peak Power\u003c\/strong\u003e is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker. \u003c\/sup\u003e \u003c\/div\u003e \u003c\/div\u003e \u003chr\u003e \u003ch4\u003eTHIELE-SMALL PARAMETERS\u003c\/h4\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ctable\u003e\u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eEquivalent Volume\u003c\/td\u003e \u003ctd\u003eVas\u003c\/td\u003e \u003ctd\u003e18.79 l\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eExcursion (mathematical)***\u003c\/td\u003e \u003ctd\u003eXmax\u003c\/td\u003e \u003ctd\u003e3.65 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFree Air Resonance\u003c\/td\u003e \u003ctd\u003eFs\u003c\/td\u003e \u003ctd\u003e69.97 Hz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMechanical Factor\u003c\/td\u003e \u003ctd\u003eQms\u003c\/td\u003e \u003ctd\u003e2.78\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eElectrical Factor\u003c\/td\u003e \u003ctd\u003eQes\u003c\/td\u003e \u003ctd\u003e0.33\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eTotal Factor\u003c\/td\u003e \u003ctd\u003eQts\u003c\/td\u003e \u003ctd\u003e0.30\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCone Area\u003c\/td\u003e \u003ctd\u003eSd\u003c\/td\u003e \u003ctd\u003e249 cm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMechanical Mass\u003c\/td\u003e \u003ctd\u003eMms\u003c\/td\u003e \u003ctd\u003e23.79 g\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBl Factor\u003c\/td\u003e \u003ctd\u003eBl\u003c\/td\u003e \u003ctd\u003e12.78 Tm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDc Resistance\u003c\/td\u003e \u003ctd\u003eRe\u003c\/td\u003e \u003ctd\u003e5.2 Ohms\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInductance\u003c\/td\u003e \u003ctd\u003eLe\u003c\/td\u003e \u003ctd\u003e0.34 mH at 1 kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMechanical Mass Without Air\u003c\/td\u003e \u003ctd\u003eMmd\u003c\/td\u003e \u003ctd\u003e21.57 g\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMechanical Compliance\u003c\/td\u003e \u003ctd\u003eCms\u003c\/td\u003e \u003ctd\u003e0.217 mm\/N\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\u003c\/table\u003e \u003cp\u003e***Xmax=(Voice coil winding depth-Magnetic Gap depth)\/2+ Mgnetic Gap Depth\/4\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e\u003c\/div\u003e \u003c\/div\u003e \u003chr\u003e \u003ch4\u003eEXTRA INFO\u003c\/h4\u003e \u003cdiv\u003e \u003cdiv\u003e\u003ctable\u003e\u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eOverall Diameter\u003c\/td\u003e \u003ctd\u003e8.20 (208.5 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFront Mount Baffle Cutout\u003c\/td\u003e \u003ctd\u003e7.30 (185.5 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMounting Depth\u003c\/td\u003e \u003ctd\u003e3.66 (93 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOverall Depth\u003c\/td\u003e \u003ctd\u003e4.00 (101.5 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eNet Weight\u003c\/td\u003e \u003ctd\u003e4.32 Lbs (1.96 kg)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.51 Lbs (2.50 kg)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCarton Dimensions W x L x H\u003c\/td\u003e \u003ctd\u003e9.05 x 9.05 x 5.11 (230 x 230 x 130 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e\n\u003cdiv class=\"replacement-content\"\u003e\u003c\/div\u003e\u003cdiv class=\"replacement-content\"\u003e\u003c\/div\u003e\u003ch3\u003eFEATURES\u003c\/h3\u003e\u003cul\u003e\n            \u003cli\u003e\u003cdiv class=\"replacement-content\"\u003e\u003c\/div\u003e\u003c\/li\u003e\n        \u003c\/ul\u003e\u003cdiv class=\"replacement-content\"\u003e\u003c\/div\u003e","brand":"PRV Audio","offers":[{"title":"Default Title","offer_id":46431952699542,"sku":"8MB700FT-NDY","price":167.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0602\/8971\/2278\/files\/data_b0cca57c-c776-49f7-a152-edc8b4e5ed96.jpg?v=1782361696","url":"https:\/\/horizongearco.com\/es\/products\/prv-audio-8mb700ft-ndy-8-midbass-neodymium-loudspeaker","provider":"Horizon Gear Co.","version":"1.0","type":"link"}