PRV Audio 6MR500-NDY 6.5" NEODYMIUM MIDRANGE LOUDSPEAKER
-
Estimated Delivery:Jun 17 - Jun 21
-
Free Shipping*: excludes oversized items
GUARANTEED SAFE & SECURE CHECKOUT
PRV Audio 6MR500-NDY 6.5" NEODYMIUM MIDRANGE LOUDSPEAKER
Features
There is no doubt that the 6MR500-NDY is one of the best midrange loudspeakers for audio professionals. It offers excellent durability and a smooth full-range response up to 13,000 Hz.
Combined with other fine materials, this high-energy, rare-earth neodymium motor magnet assembly resolves fine details in audio, which is a high-end requirement for audiophiles in car audio and motorcycle custom builders. Great addition to the MR Neodymium Series!
You can expect an excellent sound stage and realistic sound reproduction with this loudspeakers wide coverage and transient response. This refers to the ability to accurately reproduce rapid changes in sound, contributing to a high-quality audio experience.
- Great as door speaker for large custom door panel setup.
- Built for loud and clear vocal performance in tight, compact spaces
- 500 Watts RMS power rating produces high acoustic output
- 2 DUAL layer CCAW voice coil wound on Kapton former, 8 Ohm
- Fast transient response, minimal tonal coloration, and a deep, dynamic midbass
- Also available in 4 Ohm 6MR500-NDY-4
The powerful neodymium slug magnet assembly ensures high flux concentrations. Its magnetic structure significantly improves heat dissipation. This increases power handling and lowers power compression, with an optimal power-to-weight ratio.
Everything about this speaker is designed for reliable and consistent high output levels even when driven to its limit. This allows you to achieve high fidelity sound at low distortion with the most enjoyable possible listening experience.
PRV 6.5 Midrange Speaker 6MR500-NDY 500 Watts / 8 Ohm High Power Neodymium PRO Audio Loudspeaker
Recommended Amplifier configurations and crossover points:
2 Speakers 1x MDX1200.2 2 Ohm, 2 speakers in parallel on bridged channel
4 Speakers 1x QS3000 2 Ohm, 4 speakers in parallel
8 Speakers 1x QS5000 1 Ohm, 8 speakers in parallel
Recommended HPF using PRV Digital Signal Processor DSP when using up to 500 Watts RMS musical power
- 220 Hz at 12 dB per octave filter Crossover / BT12
- 180 Hz at 18 dB per octave filter Crossover / BT18
If you have compression drivers on your system the recommended LPF is 5,000 at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.
GENERAL SPECIFICATIONS
| Nominal Diameter | 6" (152 mm) |
| Nominal impedance | 8 Ohm |
| Nominal Power Handling | 250 Watts |
| Continuous Program Power (RMS) | 500 Watts |
| Max Peak Power | 1000 Watts |
| Sensitivity 2.83V at 1m | 96 dB |
| Recommended Hi Pass Crossover** **For Full Power Handling | 220 Hz** **12db Per Octave Crossover |
| Frequency Response at -10dB | 90 - 13,000 Hz |
| Voice Coil Diameter | 2" (50 mm) |
| Voice Coil Wire | CCAW |
| Voice Coil Winding Depth | 11.2 mm |
| Former Material | Kapton |
| Magnetic Gap Depth | 5.5 mm |
| Frame Material | Die Cast Aluminum |
THIELE-SMALL PARAMETERS
| Equivalent Volume | Vas | 5.13 l |
| Excursion (mathematical)*** | Xmax | 4.22 mm |
| Free Air Resonance | Fs | 104.6 Hz |
| Mechanical Factor | Qms | 22.73 |
| Electrical Factor | Qes | 0.54 |
| Total Factor | Qts | 0.53 |
| Cone Area | Sd | 143 cm |
| Mechanical Mass | Mms | 12.88 g |
| Bl Factor | Bl | 9.84 Tm |
| Dc Resistance | Re | 6.2 Ohms |
| Inductance | Le | 0.12 mH at 1 kHz |
| Mechanical Mass Without Air | Mmd | 11.91 g |
| Mechanical Compliance | Cms | 0.179 mm/N |
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4
EXTRA INFO
| Overall Diameter | 6.47" (164.5 mm) |
| Front Mount Baffle Cutout | 5.59" (142 mm) |
| Mounting Depth | 2.91" (74 mm) |
| Overall Depth | 3.22" (82 mm) |
| Net Weight | 3.34 Lbs (1.51 kg) |
| Shipping Weight | 3.64 Lbs (1.65 kg) |
| Carton Dimensions W x L x H | 7.09" x 7.09" x 4.37" (155 x 155 x 95 mm) |
FEATURES
Free Shipping*
We only offer Free Shipping to the 48 contiguous United States.
*Please note that we do not offer Free Shipping on all items as some items are oversized and may require a surcharge.
Shipping Restrictions
We currently do not ship to P.O. boxes or APO/FPO addresses.
We do not offer FREE Shipping to Hawaii, Puerto Rico, or Alaska.
International Shipping
Sorry, but we currently do not ship internationally at this time.
Returns
Once your item(s) are delivered, you have 30 days from the date of delivery to ship them back to us for a full refund. After 30 days, all sales are FINAL and returns will not be accepted.
If there is a problem with your order, please be sure to contact us immediately!
To be eligible for a return, all merchandise must be in its original packaging, unused, in original factory condition, and must include all original packaging materials, warranty cards, manuals and accessories.
Customer Services
If for some reason you have an issue with your order, please email us directly.
Frequently Asked Questions
How long does shipping take?
We typically process, handle and ship all new orders within 1-2 business days.
Do you ship internationally?
Unfortunately, we do not currently offer international shipping.
How do I start a return?
Please email us here to submit a return request.
Can I install this myself or do I need a professional?
For optimal efficiency and performance, we recommend professional installation for ALL of the products we offer.
How can I contact customer service?
Call us at (888) 884-6229 or email us at support@horizongearco.com