PRV Audio TW500My-Nd PRO AUDIO SUPER TWEETER (Each)
-
Estimated Delivery:Jun 27 - Jul 01
-
Free Shipping*: excludes oversized items
GUARANTEED SAFE & SECURE CHECKOUT
PRV Audio TW500My-Nd PRO AUDIO SUPER TWEETER (Each)
PLEASE NOTE: THIS ITEM IS SOLD INDIVIDUALLY (EACH)
Features
- Designed to fit in tight spaces without any major modifications
- Mylar diaphragm for superior accurate and detailed response
- Designed to add high output, high frequency response to any large system
- Built-in capacitors act as a crossover and attenuates the low frequencies for smooth frequency response
- Able to take a ton of power! Up to 150 watts RMS of power handling
With an aluminum voice coil wound on a Kapton former and Mylar diaphragm, the moving parts have been kept as light as possible for improved efficiency.
In addition, this tweeter uses a powerful neodymium magnet to further increase efficiency and ensure accurate control for low distortion.
Producing a sensitivity of 109 dB 1W/1m this tweeter can keep up with even the most efficient sound systems. You will be amazed by the sheer output levels the TW500My-Nd can produce!
A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included.
The Mylar diaphragm is attached to a 1.25 diameter aluminum wire with Kapton former for a high 150 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP
- 4000 Hz at 12 dB per octave filter Crossover / BT12
- 3500 Hz at 18 dB per octave filter Crossover / BT18
Its incredible output capabilities and wide frequency response make this tweeter one of our best super tweeters on the market!
PRV Neodymium Super Tweeter TW500My-Nd 150 Watts 8 Ohm Premium, High Efficient Tweeter Mylar Diaphragm
Recommended Settings with DSP / Crossover
We strongly recommended ALWAYS to use a high pass filter ( HPF ) on or to the amplifier channel that will be running the tweeters.
If you have just a high output crossover such as: EX3.5 STEREO or EX4.6 PRO Use the HIGH OUT channel to feed the amplifier input with a HPF set to:
At 5000Hz if you are running just a speaker and tweeter setup
At 8000Hz If you are running a 3-Way system ( speaker, phenolic driver and tweeter )
If you are taking your system to the next level and tuning it with a digital signal processor: DSP 2.4X or DSP 2.8X Set on the channel to feed the amplifier input with a HPF set to:
At 5000Hz at LR18 if you are running just a speaker and tweeter setup
At 7000Hz at LR24 If you are running a 3-Way system ( speaker, phenolic driver and tweeter )
GENERAL SPECIFICATIONS
| Nominal impedance | 8 Ohms |
| Rated AES Power Handling (RMS) | 75 Watts |
| Program Power | 150 Watts |
| Sensitivity 2.83V at 1m | 108 dB |
| Recommended Hi Pass Crossover** **For Full Power Handling | 4000 Hz** **12db Per Octave Crossover |
| Frequency Response at -10dB | 3,500 - 19,000 Hz |
| Voice Coil Diameter | 1.25(32 mm) |
| Voice Coil Wire | Aluminum |
| Voice Coil Former Material | Kapton |
| Diaphragm Material | Mylar |
| Flux Density | 1.30 T |
| Magnet Material | Neodymium |
EXTRA INFO
| Overall Depth | 1.77 (45 mm) |
| Mounting Depth | 1.61 (41 mm) |
| Overall Diameter | 4.0 (100 mm) |
| Cutout Diameter | 3.19 (81 mm) |
| Net Weight | 1.25 lbs (0.56 kg) |
| Shipping Weight | 1.33 lbs (0.60 kg) |
| Carton Dimensions W x L x H | 4.1 x 4.1 x 2.1 (105 x 105 x 55 mm) |
FEATURES
- This Neodymium Bullet Tweeter features a Mylar diaphragm for low distortion and extended high frequency response
- Includes Polyester metalized film capacitor to lower distortion by limiting low frequencies
- Rated Power Handling: 75 Watts
- Program Power: 150 Watts
- Sensitivity (1W/1m): 108 dB
Free Shipping*
We only offer Free Shipping to the 48 contiguous United States.
*Please note that we do not offer Free Shipping on all items as some items are oversized and may require a surcharge.
Shipping Restrictions
We currently do not ship to P.O. boxes or APO/FPO addresses.
We do not offer FREE Shipping to Hawaii, Puerto Rico, or Alaska.
International Shipping
Sorry, but we currently do not ship internationally at this time.
Returns
Once your item(s) are delivered, you have 30 days from the date of delivery to ship them back to us for a full refund. After 30 days, all sales are FINAL and returns will not be accepted.
If there is a problem with your order, please be sure to contact us immediately!
To be eligible for a return, all merchandise must be in its original packaging, unused, in original factory condition, and must include all original packaging materials, warranty cards, manuals and accessories.
Customer Services
If for some reason you have an issue with your order, please email us directly.
Frequently Asked Questions
How long does shipping take?
We typically process, handle and ship all new orders within 1-2 business days.
Do you ship internationally?
Unfortunately, we do not currently offer international shipping.
How do I start a return?
Please email us here to submit a return request.
Can I install this myself or do I need a professional?
For optimal efficiency and performance, we recommend professional installation for ALL of the products we offer.
How can I contact customer service?
Call us at (888) 884-6229 or email us at support@horizongearco.com